Configuring the WireGuard App on Android
Instructions for setting up WireGuard VPN on Android
To connect to the VPN service on an Android device, download the WireGuard app from the Play Store.
Download the configuration file to your Android device or use the QR code.
Open the configuration file on your Android device. You will see the following screen, as shown in the screenshot.
Note
After downloading the configuration file, it is saved with a .txt
extension. Before importing it into the WireGuard client, rename the file and change its extension from .txt
to .conf
.
Select a preferred method to add the configuration file, such as Import from file or archive.
Allow VPN configuration changes and confirm by pressing the corresponding button. The configuration file will then be added to your device.
To connect to the VPN, toggle the switch to the right.
This completes the setup.
Warning
WireGuard allows only one active connection at a time.
After connecting to the VPN, you can check your IP address using the 2IP service.
Caution
VPN orders with a dedicated IP do not support the WireGuard protocol.
Help
If you have any questions or issues with the connection, contact us through the ticket system.